Nextech Diagnostic Systems

> Product > Auto Diagnostic Tool > After Market > Multi-gateway

Name of each part of the product_ Carmanscan I

HOW TO Connect

1) Connect the connector A to the Scanner.
2) Connect the connector B to the adaptor for each vehicle manufacturer only for if not the

OBD-II communication type.

3) Connect the connector B to the diagnosis connector of the vehicle.

Tool Protocol		Applicable vehicle		Carman scan I	Carman scan II	Carman scan Lite
High Speed CAN		GENERAL MAKER	HONDA VOLVO			-
STANDARD 500k	EXTENDED
Low Speed CAN		FORD MAZDA	VOLVO			-
STANDARD 250K,125K 100K	EXTENDED 250K,125K, 100K
Single Wire CAN		GM/OPEL/HOLDEN DAEWOO/SUZUKI PSA/AFL
J1850 PWM VPW		GM/OPEL/HOLDEN FORD/MAZDA		-	-	-
115K High Speed Serial		BMW/MINI(04~07)

Tool Protocol		Applicable vehicle		Carman scan Wi	Carman scan VG	Carman scan VG Plus
High Speed CAN		GENERAL MAKER	HONDA VOLVO		-	-
STANDARD 500k	EXTENDED
Low Speed CAN		FORD MAZDA	VOLVO		-	-
STANDARD 250K,125K 100K	EXTENDED 250K,125K, 100K
Single Wire CAN		GM/OPEL/HOLDEN DAEWOO/SUZUKI PSA/AFL				-
J1850 PWM VPW		GM/OPEL/HOLDEN FORD/MAZDA		-	-	-
115K High Speed Serial		BMW/MINI(04~07)				-

* Reference

	: Possible for diagnosis without the Multi-gateway
	: Requires Multi-gateway when diagnosing
	: Requires Multi-gateway when diagnosing as follows ;

Carman Scan I : Products before Serial No. K5000 without Can Interface Module
Carman Scan II : Products purchased before 2005 without Can Interface Module
Carman Wi : Products before Serial No. WIIH-0001

Basic information of Multi-gateway

1. Product Specification

- Communication Specification : Refer to Application Protocol (Appendix)
- Product dimension : 2135 x 75 x 26(mm)
- Product weight : 0.6kg
- Used voltage : USB(5V), DLC when vehicle power is used (12~24V)
- USB Standard : 2.0

2. How to use : Connect to the existing Vehicle Scanner in use, which makes it possible to diagnose
the new communication protocol.

3. Applicable Scanner : Carmanscan I, Carmanscan II, Carmanscan Lite, Carman Wi, Carman VG

4. Available types of communication :

1) Serial communication

- 115Kbps support Ex.) BMW 1/3/5/7 series of newest body vehicles

Series 1: After 2006-style, Series 3: After 2004-style
Series 5: After 2006-style, Series 7: After 2002-style

2) CAN communication

- Standard CAN 2.0A / Extended CAN 2.0B diagnosis
- Single Wired CAN Diagnosis Ex.) Windstorm Airbag System

3) j1850 communication
4) J1587 communication
5) Clock & Signal function

- Samsung / Nissan Clock Signal support
- Mazda Frequency Signal support

5. Power supply

For the vehicle with the OBD-II communication method, there is need of separate power supply and the diagnosis is possible after connecting to the vehicle iagnosis connector.

6. How to Update

- Update is possible through the USB terminal built-in the product.
- It is possible to supply the power through the USB terminal.
- Homepage address : http://www.nex-tek.com

http://www.nex-tek.com/carman

CAUTION!

When communicating with the vehicle not supplied with the power supply from the diagnosis connector, Multi-gateway has to be unloaded from the Vehicle Scanner used and attempt the communication. Power is not supplied to Multi-gateway to generate the communication defect.